Details

---

BUY SI8274AB1-IS1 https://www.utsource.net/itm/p/12609360.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.5	-	5.5	V	Operating supply voltage range
Output Current	IO	-	100	-	mA	Maximum continuous output current
Isolation Voltage	VIORM	-	-	5000	Vrms	Maximum repetitive peak isolation voltage
Propagation Delay	tPD	10	40	70	ns	Time delay from input to output
Pulse Width Distortion	PWDO	-	3	-	ns	Maximum pulse width distortion at output
Common Mode Transient Immunity	CMTI	-	25	-	kV/渭s	Rate of change of common mode voltage that can be tolerated
Operating Temperature	Toper	-40	-	125	掳C	Range of operating temperature
Storage Temperature	Tstg	-65	-	150	掳C	Range of storage temperature

Instructions for SI8274AB1-IS1

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 2.5V to 5.5V to prevent damage or erratic behavior.

2. Output Load Management: The device can deliver up to 100mA continuously. Avoid exceeding this limit to ensure reliable operation and prevent overheating.

3. Isolation Considerations: Maintain the isolation voltage below 5000Vrms to protect against breakdown. This is crucial in applications where high voltages are present across the isolation barrier.

4. Timing Parameters: Be aware of the propagation delay (tPD) which can vary between 10ns to 70ns. Design your timing circuits accordingly to account for this variability.

5. Common Mode Transient Immunity (CMTI): The device has a CMTI rating of 25kV/渭s. Ensure that any transient common mode voltages do not exceed this rate to avoid signal degradation or failure.

6. Temperature Range: Operate the device within the temperature range of -40掳C to +125掳C. Store it within -65掳C to +150掳C to maintain component integrity.

7. Handling Precautions: Follow standard ESD handling procedures as the device is sensitive to electrostatic discharge.

8. Mounting and PCB Layout: Ensure proper PCB layout with adequate spacing and grounding to minimize noise and interference, especially important for maintaining CMTI performance.

9. Testing and Validation: Before deployment, thoroughly test the device under expected operating conditions to validate performance parameters and reliability.

(For reference only)