Details

---

BUY 2SA1535-R https://www.utsource.net/itm/p/12609362.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCE	-	-	400	V
Emitter-Base Voltage	VEB	-5	-	5	V
Collector Current	IC	-	-	15	A
Base Current	IB	-	-	3	A
Power Dissipation	PT	-	-	180	W	TC = 25掳C
Storage Temperature	TSTG	-55	-	150	掳C
Operating Junction Temperature	TJ	-55	-	150	掳C
Transition Frequency	fT	-	200	-	MHz	IC = 150mA, VCE = 10V
DC Current Gain	hFE	20	70	200	-	IC = 150mA, VCE = 10V

Instructions for Use:

1. Handling and Storage:

   • Store the 2SA1535-R in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

2. Mounting:

   • Ensure proper heat sinking if operating at high power levels to maintain junction temperature within safe limits.
   • Use appropriate mounting hardware to secure the transistor and ensure good thermal contact with the heatsink.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly according to the circuit diagram.
   • Ensure that the voltage and current ratings are not exceeded to prevent damage to the transistor.

4. Operational Parameters:

   • Do not exceed the maximum ratings for collector-emitter voltage, base-emitter voltage, collector current, and power dissipation.
   • Monitor the operating junction temperature to ensure it remains within the specified range.

5. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SA1535-R before installing it in a circuit.
   • Test the circuit under controlled conditions to ensure proper operation and to avoid potential damage.

6. Safety:

   • Always follow standard safety procedures when working with electronic components and circuits.
   • Use protective equipment such as gloves and goggles when handling the transistor, especially if soldering is involved.

(For reference only)