Details

---

BUY DK456 https://www.utsource.net/itm/p/12609385.html

Parameter	Description	Value
Part Number	Component Identifier	DK456
Type	Device Type	Diode
Package	Enclosure Type	TO-220
Maximum Reverse Voltage (Vr)	Max Voltage Across Diode	1000V
Maximum Forward Current (If)	Max Current Through Diode	1A
Peak Surge Current (Ism)	Max Surge Current	8A (10ms)
Forward Voltage Drop (Vf)	Voltage Drop at Rated Current	1.1V @ 1A
Reverse Recovery Time (trr)	Time for Diode to Recover	50ns
Operating Temperature Range	Temperature Range for Operation	-55掳C to +150掳C
Storage Temperature Range	Temperature Range for Storage	-65掳C to +175掳C
Mounting Type	Installation Method	Through-Hole

Instructions:

1. Handling:

   • Handle the DK456 with care to avoid damage to the leads and body.
   • Use appropriate ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure the leads are not bent excessively close to the body to avoid mechanical stress.
   • Solder the leads within the recommended temperature range of 260掳C for no more than 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Testing:

   • Test the diode using a multimeter or diode tester to ensure proper functionality.
   • Check for continuity and reverse bias conditions.

4. Storage:

   • Store the DK456 in a dry, cool place to prevent moisture damage.
   • Keep the components away from direct sunlight and extreme temperatures.

5. Operational Considerations:

   • Do not exceed the maximum ratings specified in the table to avoid damage or failure.
   • Ensure adequate heat dissipation if operating at high currents or in high-temperature environments.

(For reference only)