Details

---

BUY MP6501AGF-Z https://www.utsource.net/itm/p/12609394.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	-	2.7	-	5.5	V
Output Voltage	VOUT	Adjustable	-	-	-	V
Quiescent Current	IQ	No load	-	10	-	渭A
Load Regulation		10mA to 150mA	-	0.3	-	%
Line Regulation		VIN changes	-	0.2	-	%/V
Dropout Voltage	VDROPOUT	IOUT = 150mA	-	300	-	mV
PSRR (Power Supply Rejection Ratio)	PSRR	@ 1kHz, IOUT = 10mA	-	60	-	dB
Operating Temperature	TOP	-	-40	-	85	掳C

Instructions for MP6501AGF-Z:

1. Input Voltage Selection:

   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.

2. Output Voltage Configuration:

   • The output voltage can be adjusted using external resistors. Refer to the datasheet for specific resistor values and configurations.

3. Quiescent Current Consideration:

   • The device maintains a low quiescent current of typically 10渭A under no-load conditions, which helps in extending battery life in portable applications.

4. Load Regulation:

   • The load regulation is typically 0.3%, ensuring stable output voltage across varying load currents from 10mA to 150mA.

5. Line Regulation:

   • Line regulation is typically 0.2% per volt of input voltage change, maintaining output stability with fluctuations in input voltage.

6. Dropout Voltage Management:

   • At an output current of 150mA, the dropout voltage is typically 300mV, allowing efficient operation even at low input-to-output voltage differences.

7. PSRR Optimization:

   • The power supply rejection ratio is typically 60dB at 1kHz, providing effective noise suppression from the input supply.

8. Operating Temperature Range:

   • The device operates reliably over a temperature range from -40掳C to 85掳C.

9. Installation and Handling:

   • Follow standard handling practices for sensitive electronic components to avoid damage due to electrostatic discharge (ESD).

10. Layout Recommendations:

    • For optimal performance, place the input and output capacitors close to the device. Use wide traces for power connections to minimize voltage drops and ensure stable operation.

(For reference only)