Details

---

BUY CY37064P44-125AXC https://www.utsource.net/itm/p/12609407.html

Below is the parameter table and instructions for the CY37064P44-125AXC:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	3.0	3.3	3.6	V
Operating Temperature Range	Toper	-40		85	掳C
Storage Temperature Range	Tstg	-65		150	掳C
Output Current per Channel	Iout	0	100	150	mA
Quiescent Current	IQ	0.1	0.5	1.0	mA	VCC = 3.3V, No Load
Maximum Power Dissipation	Pd		1000		mW	Ta = 25掳C
Input Voltage Range	Vin	0	3.3	3.6	V
Output Voltage Range	Vout	0	3.3	3.6	V
Rise Time	tr	0.1	0.5	1.0	渭s	VCC = 3.3V, RL = 100惟
Fall Time	tf	0.1	0.5	1.0	渭s	VCC = 3.3V, RL = 100惟
Propagation Delay	tpd	0.5	1.0	1.5	ns	VCC = 3.3V, RL = 100惟
Enable Input High Voltage	Vih	2.0	2.5	3.0	V
Enable Input Low Voltage	Vil	0.8	1.0	1.2	V

Instructions

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 3.0V to 3.6V.
   • Use a stable power source to avoid voltage fluctuations.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

3. Output Current:

   • The maximum output current per channel is 150mA. Ensure that the load does not exceed this limit to prevent damage to the device.

4. Quiescent Current:

   • The quiescent current should be kept as low as possible to minimize power consumption. It typically ranges from 0.1mA to 1.0mA.

5. Power Dissipation:

   • The maximum power dissipation is 1000mW at 25掳C ambient temperature. Ensure proper heat dissipation if operating near this limit.

6. Input and Output Voltages:

   • The input and output voltages should be within the range of 0V to 3.6V to ensure proper operation.

7. Timing Parameters:

   • The rise and fall times are specified to ensure reliable switching. Ensure that the load resistance (RL) is 100惟 for these specifications.

8. Enable Input:

   • The enable input high voltage (Vih) should be between 2.0V and 3.0V to activate the device.
   • The enable input low voltage (Vil) should be between 0.8V and 1.2V to deactivate the device.

9. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

10. Mounting and PCB Layout:

    • Follow recommended PCB layout guidelines to ensure optimal performance and thermal management.
    • Use appropriate decoupling capacitors near the power pins to filter out noise and provide stable power.

By following these parameters and instructions, you can ensure the reliable and efficient operation of the CY37064P44-125AXC.

(For reference only)