Details

---

BUY G2RL-14-E-CN 24VDC https://www.utsource.net/itm/p/12609418.html

Parameter	Value/Description
Part Number	G2RL-14-E-CN 24VDC
Type	Relay
Brand	OMRON
Supply Voltage	24 VDC
Coil Power Consumption	0.6 W (25 mA @ 24 VDC)
Coil Resistance	960 惟
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10 A, 250 VAC / 30 VDC (resistive load)
Contact Material	Silver alloy
Insulation Resistance	100 M惟 or more (at 500 VDC)
Dielectric Strength	2500 VAC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Operating Humidity	20% to 90% RH (non-condensing)
Mechanical Life	10 million operations (no load)
Electrical Life	100,000 operations (resistive load)
Weight	10 g (approx.)
Dimensions	17.5 mm x 12.5 mm x 10.5 mm
Terminal Type	Solder lug
Mounting	PCB mount
Approvals	UL, cUL, VDE, CQC

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is 24 VDC.
   • The coil power consumption is 0.6 W, so use a power source capable of providing at least 25 mA.

2. Installation:

   • Mount the relay on a PCB using the solder lug terminals.
   • Ensure the relay is securely fastened to avoid mechanical stress.

3. Wiring:

   • Connect the coil terminals to the 24 VDC power supply.
   • Connect the load to the appropriate contact terminals (common, normally open, and normally closed).

4. Environmental Considerations:

   • Operate the relay within the temperature range of -40掳C to +85掳C.
   • Store the relay in a dry environment with humidity between 20% and 90% RH (non-condensing).

5. Handling:

   • Handle the relay with care to avoid damage to the contacts and other components.
   • Do not apply excessive force to the terminals during installation.

6. Testing:

   • Test the relay under no-load conditions first to ensure proper operation.
   • Verify the contact resistance and insulation resistance before connecting the load.

7. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if any issues are detected.

8. Safety:

   • Follow all safety guidelines and regulations when handling and installing the relay.
   • Ensure the relay is disconnected from the power source before performing any maintenance.

(For reference only)