Details

---

BUY LT6220CS5#TRMPBF https://www.utsource.net/itm/p/12609429.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage	2.7	-	5.25	V	Operating supply voltage range
Input Offset Voltage	-	100	-	μV	Maximum input offset voltage at 25°C
Input Bias Current	-	1	-	pA	Typical input bias current
Input Voltage Noise	-	9	-	nV/√Hz	Input voltage noise density
Slew Rate	-	4	-	V/μs	Slew rate
Bandwidth	-	36	-	MHz	Small signal bandwidth
Gain-Bandwidth Product	-	80	-	MHz	Gain-bandwidth product
Output Short-Circuit	Yes	-	-	-	Output short-circuit protection
Operating Temperature	-40	-	125	°C	Operating temperature range

Instructions for LT6220CS5#TRMPBF

1. Power Supply Connections:

   • Connect the positive supply (V+) to pin 8.
   • Connect the negative supply (V-) to pin 4.
   • Ensure that the supply voltage is within the specified range of 2.7V to 5.25V.

2. Input Connections:

   • Connect the non-inverting input (IN+) to pin 3.
   • Connect the inverting input (IN-) to pin 2.
   • Ensure differential input voltage does not exceed the supply voltage.

3. Output Connections:

   • Connect the output (OUT) from pin 6 to your load or next stage circuitry.
   • Be cautious of the output short-circuit protection feature; do not rely on it as a substitute for proper design.

4. Ground Connection:

   • Connect the ground (GND) to pin 5.

5. Stability and Compensation:

   • The device is unity-gain stable.
   • No external compensation is required.

6. Operating Temperature Range:

   • Ensure that the ambient temperature remains within -40°C to 125°C for reliable operation.

7. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD).
   • Follow standard ESD handling procedures when working with this component.

8. Storage Conditions:

   • Store in a dry, cool place away from direct sunlight and moisture.

Note: Always refer to the official datasheet for the most accurate and detailed information.

(For reference only)