Details

---

BUY BUK202-50X. https://www.utsource.net/itm/p/12609430.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	500	V
Emitter-Collector Voltage	VEC	-	-	500	V
Gate-Emitter Voltage	VGE	-15	-	15	V
Continuous Collector Current	IC	-	20	-	A
Pulse Collector Current (tp = 10 ms, duty cycle 1%)	ICM	-	60	-	A
Power Dissipation (TA = 25掳C)	PD	-	270	-	W
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	RthJC	-	0.44	-	掳C/W

Instructions for Use:

1. Handling Precautions:

   • Handle the BUK202-50X with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

2. Mounting:

   • Ensure the device is securely mounted to a heatsink to maintain optimal thermal performance.
   • Use thermal compound between the device and the heatsink to improve heat transfer.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure the junction temperature does not exceed 150掳C to prevent thermal damage.

4. Gate Drive:

   • Apply a gate voltage within the specified range (-15V to +15V).
   • Use a gate resistor to limit current and prevent oscillations.

5. Storage:

   • Store the device in a dry, cool environment within the storage temperature range (-55掳C to 150掳C).

6. Testing:

   • Perform all tests under controlled conditions to ensure accurate results.
   • Refer to the datasheet for specific test conditions and procedures.

7. Safety:

   • Follow all relevant safety guidelines and regulations when using the device.
   • Ensure proper ventilation if operating at high power levels or in enclosed spaces.

(For reference only)