Details

---

BUY M201-2V https://www.utsource.net/itm/p/12609433.html

Parameter	Description	Value
Part Number	Identification of the component	M201-2V
Type	Component classification	Voltage Regulator
Input Voltage	Range of input voltage it can handle	2.7V to 5.5V
Output Voltage	Fixed output voltage	2V
Output Current	Maximum continuous output current	250mA
Dropout Voltage	Minimum difference between input and output for regulation	0.3V at 250mA
Operating Temp.	Temperature range for operation	-40掳C to 85掳C
Package Type	Physical package type	SOT-23
Quiescent Current	Current consumed by the device when regulating	60渭A

Instructions:

1. Installation: Ensure that the M201-2V is soldered correctly onto the PCB, aligning with the polarity markings.
2. Input Connection: Connect the input voltage within the specified range (2.7V to 5.5V) to the VIN pin.
3. Output Connection: The VOUT pin provides a regulated 2V output. Connect this to your load or circuit requiring this voltage.
4. Ground Connection: Ensure a common ground connection between the input source, M201-2V, and the load.
5. Thermal Considerations: Given the dropout voltage and maximum output current, ensure adequate heat dissipation if operating near maximum specifications.
6. Capacitors: It is recommended to place a 0.1渭F ceramic capacitor close to the input pin and another 0.1渭F capacitor close to the output pin to stabilize the regulator.
7. Operating Environment: Operate the device within the specified temperature range to avoid damage or malfunction.

(For reference only)