Details

---

BUY KIA78DL06PI https://www.utsource.net/itm/p/12609439.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	8	-	40	V	Operating input voltage range
Output Voltage	VOUT	-	6	-	V	Fixed output voltage
Output Current	IOUT	-	-	1	A	Maximum continuous output current
Quiescent Current	IQ	-	5	-	mA	Quiescent current at no load
Dropout Voltage	VD	-	1.2	-	V	Dropout voltage at full load
Line Regulation	-	-	0.02	-	%/V	Change in output voltage with input voltage
Load Regulation	-	-	0.02	-	%/mA	Change in output voltage with load current
Ripple Rejection	-	-	60	-	dB	Power supply rejection ratio (PSRR) at 100 Hz
Thermal Shutdown	TSD	-	150	-	掳C	Temperature at which thermal shutdown occurs
Operating Junction Temp.	TJ	-40	-	125	掳C	Operating junction temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Using KIA78DL06PI

1. Input Voltage:

   • Ensure the input voltage is within the specified range (8V to 40V) to avoid damage to the device.

2. Output Voltage:

   • The device provides a fixed output voltage of 6V. No external components are required to set this voltage.

3. Output Current:

   • The maximum continuous output current is 1A. Do not exceed this limit to prevent overheating and potential damage.

4. Quiescent Current:

   • The quiescent current is typically 5mA. This is the current drawn by the regulator when there is no load.

5. Dropout Voltage:

   • The dropout voltage is typically 1.2V. Ensure the input voltage is at least 1.2V higher than the output voltage to maintain regulation.

6. Line Regulation:

   • The line regulation is 0.02% per volt, indicating that the output voltage will change by 0.02% for every 1V change in input voltage.

7. Load Regulation:

   • The load regulation is 0.02% per milliamp, indicating that the output voltage will change by 0.02% for every 1mA change in load current.

8. Ripple Rejection:

   • The power supply rejection ratio (PSRR) is 60dB at 100Hz, meaning the device can effectively reduce input ripple.

9. Thermal Shutdown:

   • The device will shut down if the junction temperature exceeds 150掳C to prevent damage from overheating.

10. Operating Junction Temperature:

    • The operating junction temperature range is -40掳C to 125掳C. Ensure the device operates within this range to avoid performance issues or damage.

11. Storage Temperature:

    • The storage temperature range is -65掳C to 150掳C. Store the device in this range to prevent degradation.

12. Mounting and Layout:

    • Use a good heat sink if the device will be operating near its maximum output current to ensure proper heat dissipation.
    • Place the input and output capacitors close to the regulator to minimize noise and improve stability.

13. Capacitors:

    • Use a 10渭F tantalum or ceramic capacitor on the input side and a 10渭F tantalum or ceramic capacitor on the output side for stability and filtering.

14. Handling:

    • Handle the device with care to avoid static discharge, which can damage the internal components.

By following these parameters and instructions, you can ensure reliable and efficient operation of the KIA78DL06PI linear regulator.

(For reference only)