Details

---

BUY FP25R12KT4/25A1200V https://www.utsource.net/itm/p/12609453.html

Parameter	Symbol	Min	Typ	Max	Unit
Forward Voltage Drop (at 25掳C, 25A)	VF	-	1.7	-	V
Reverse Blocking Voltage (at 25掳C)	VR	-	1200	-	V
Continuous Forward Current (at 25掳C)	IF	-	25	-	A
Peak Forward Surge Current (10ms, single pulse)	IFSM	-	150	-	A
Junction Temperature Range	TJ	-55	-	175	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	RthJC	-	1.5	-	掳C/W
Reverse Recovery Time (at 25掳C, 25A)	trr	-	60	-	ns

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink to maintain proper thermal management.
   • Use a thermal interface material (TIM) between the device and the heatsink to improve heat dissipation.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse bias conditions that can exceed the maximum reverse blocking voltage.
   • Use short and thick wires to minimize inductance and resistance.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 175掳C.
   • If operating at high currents or in high ambient temperatures, consider forced air cooling or liquid cooling solutions.

4. Surge Current Handling:

   • The device can handle peak forward surge currents up to 150A for a single 10ms pulse. For repeated pulses, allow sufficient time for the device to cool down.

5. Storage:

   • Store the device in a dry environment within the temperature range of -55掳C to 150掳C.
   • Avoid exposure to corrosive environments or excessive humidity.

6. Reverse Recovery:

   • Be aware of the reverse recovery time of 60ns when designing circuits to prevent potential oscillations or ringing during switching transitions.

7. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the terminals.
   • Use ESD-protected tools and work surfaces to prevent electrostatic discharge damage.

8. Compliance:

   • Ensure the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)