Details

---

BUY TLP241A(TP1,F https://www.utsource.net/itm/p/12609480.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 5 mA		1.2	1.6	V
Reverse Breakdown Voltage	VR	IR = 5 mA			5	V
Forward Current	IF	TFH = 0.5 ms		5		mA
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 50 mA, IF = 5 mA		0.4	0.7	V
Output Collector Current	IC	VCE = 5 V		50		mA
Propagation Delay Time	tpHL/tpLH	IF = 5 mA, IC = 50 mA, VDD = 5 V		3	6	渭s
Rise Time	tr	IF = 5 mA, IC = 50 mA, VDD = 5 V		0.8	1.5	渭s
Fall Time	tf	IF = 5 mA, IC = 50 mA, VDD = 5 V		0.8	1.5	渭s

Instructions for TLP241A (TP1, F)

1. Power Supply and Grounding:

   • Ensure that the power supply voltage is within the specified range to avoid damage to the device.
   • Properly connect the ground to minimize noise and interference.

2. Forward Current Handling:

   • Do not exceed the maximum forward current (IF) of 5 mA continuously to prevent overheating or damage.

3. Output Load Connection:

   • Connect the output load between the collector and emitter terminals with appropriate current limiting resistors if necessary.

4. Signal Timing:

   • Account for propagation delay times (tpHL/tpLH) in your circuit design to ensure reliable operation.
   • Consider rise time (tr) and fall time (tf) for accurate timing in high-speed applications.

5. Environmental Conditions:

   • Operate the device within the recommended temperature range to maintain performance and reliability.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge which can damage sensitive components.
   • Follow proper soldering techniques to avoid thermal stress on the device.

7. Testing:

   • Test the device under specified conditions to verify its performance parameters before integrating it into a larger system.

(For reference only)