Details

---

BUY MDD7N25RH https://www.utsource.net/itm/p/12609483.html

Parameter	Symbol	Min	Typical	Max	Unit
Drain-Source Voltage	VDS	-	-	250	V
Gate-Source Voltage	VGS	-15	-	15	V
Continuous Drain Current	ID	-	-	7	A
Pulse Drain Current	ID(p)	-	-	28	A
Gate Charge	QG	-	30	-	nC
Input Capacitance	Ciss	-	680	-	pF
Output Capacitance	Coss	-	48	-	pF
Total Power Dissipation	PTOT	-	-	210	W
Junction Temperature	TJ	-55	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the MDD7N25RH with care to avoid static discharge, which can damage the device.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal paste or a thermal pad between the device and the heatsink to improve heat dissipation.
   • Torque the mounting screws to the recommended specifications to ensure proper contact and thermal performance.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short and thick wires for the drain and source connections to minimize inductance.
   • Ensure that the gate drive circuit provides the correct voltage levels and has adequate current capability.

4. Thermal Management:

   • The device has a maximum junction temperature of 175掳C. Monitor the temperature to ensure it does not exceed this limit.
   • Use a heatsink with sufficient thermal capacity and a fan if necessary to maintain the device within its operating temperature range.

5. Operational Limits:

   • Do not exceed the maximum ratings for drain-source voltage, gate-source voltage, continuous drain current, and total power dissipation.
   • Ensure that the device operates within the safe operating area (SOA) to prevent thermal runaway and damage.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposure to corrosive environments.

7. Testing:

   • Before using the device in a final application, perform thorough testing under controlled conditions to ensure reliability and performance.

8. Documentation:

   • Refer to the datasheet and application notes provided by the manufacturer for detailed information and specific recommendations.

(For reference only)