Details

---

BUY OPA313IDBVT https://www.utsource.net/itm/p/12609485.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.7		5.5	V
Input Offset Voltage	VIO	@ 25°C	-0.3	0.1	0.6	mV
Input Bias Current	IB	@ 25°C, RL = 10kΩ	-10	0	10	nA
Input Voltage Noise	en	@ 1kHz, T = 25°C		9		nV/√Hz
Slew Rate	SR		0.4		0.8	V/μs
Unity-Gain Bandwidth	fT		1.1		1.8	MHz
Large-Signal Voltage Gain	AV	@ G = +1, RF = 10kΩ	100		160	dB
Output Short-Circuit	tOSC	@ VCC = 3V		30		ms

Instructions for OPA313IDBVT:

1. Power Supply Requirements:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.

2. Input Signal Handling:

   • Be mindful of the input offset voltage which can vary between -0.3mV and 0.6mV at room temperature.
   • The input bias current should be considered as it can range from -10nA to 10nA.

3. Noise Consideration:

   • At 1kHz, the typical input voltage noise is 9nV/√Hz.

4. Performance Parameters:

   • The slew rate is typically between 0.4V/μs and 0.8V/μs.
   • Unity-gain bandwidth ranges from 1.1MHz to 1.8MHz.
   • For large-signal applications, the voltage gain can be between 100dB and 160dB when configured with a gain of +1 and a feedback resistor of 10kΩ.

5. Protection Features:

   • The device has an output short-circuit duration capability of approximately 30ms when operating at a supply voltage of 3V.

Note: Always refer to the datasheet for the most accurate and detailed specifications and application notes specific to your use case.

(For reference only)