Details

---

BUY D79F8513A https://www.utsource.net/itm/p/12609486.html

Parameter	Value	Unit
Part Number	D79F8513A	-
Type	Diode	-
Maximum Reverse Voltage (Vr)	850	V
Maximum Forward Current (If)	13	A
Peak Reverse Current (Irm)	1500	渭A
Operating Temperature Range	-40 to +150	掳C
Storage Temperature Range	-65 to +150	掳C
Forward Voltage (Vf) at 13A	1.1	V
Reverse Recovery Time (trr)	300	ns
Package Type	TO-220	-

Instructions for Use:

1. Handling Precautions:

   • Handle the diode with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Use appropriate thermal paste or heat sink compound to improve thermal conductivity if using a heat sink.
   • Secure the diode firmly but avoid excessive torque on the leads to prevent damage.

3. Soldering:

   • Preheat the diode to reduce thermal shock.
   • Use a soldering iron with a temperature not exceeding 350掳C.
   • Solder each lead for no more than 3 seconds to avoid overheating.

4. Electrical Connections:

   • Connect the anode to the positive side of the circuit and the cathode to the negative side.
   • Ensure that the maximum reverse voltage and forward current ratings are not exceeded.

5. Thermal Management:

   • If operating near the maximum current, use a heat sink to dissipate excess heat.
   • Monitor the temperature of the diode to ensure it stays within the operating temperature range.

6. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the diode in its original packaging until ready for use to protect against moisture and static.

7. Testing:

   • Use a multimeter to test the diode for continuity and reverse bias resistance before installation.
   • Check for any visual signs of damage or wear before use.

8. Compliance:

   • Ensure that the diode meets all relevant safety and regulatory standards for your application.
   • Refer to the datasheet for detailed compliance information.

(For reference only)