Details

---

BUY ICL7606CJN https://www.utsource.net/itm/p/12609500.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		-18		-2.7	V
Input Voltage Range	Vin	Referenced to negative rail	-15		-0.5	V
Quiescent Current	IQ	Vcc = -5V		40		渭A
Input Bias Current	IB	Vcc = -5V, f = 1kHz		3		pA
Input Offset Voltage	VOS	Vcc = -5V, f = 1kHz		2		mV
Slew Rate	SR	Vcc = -5V		0.3		V/渭s
Common Mode Rejection	CMRR	Vcc = -5V, f = 60Hz		90		dB
Power Supply Rejection	PSRR	Vcc = -5V, f = 60Hz		90		dB
Output Short-Circuit	tsc	Tj = 25掳C, TO-99 package		300		ms

Instructions for ICL7606CJN

1. Power Supply:

   • Ensure the supply voltage is within the specified range of -2.7V to -18V.
   • Use a stable power supply to avoid fluctuations that can affect performance.

2. Input Signals:

   • Keep input voltages within the range of -15V to -0.5V relative to the negative rail to prevent damage or erratic behavior.
   • Ensure input signals are properly filtered and conditioned if they come from noisy sources.

3. Biasing:

   • The input bias current is very low (around 3pA), but still consider using high-quality resistors in the feedback loop to minimize offset errors.

4. Offset Voltage Adjustment:

   • For applications requiring precise measurements, use an external trim potentiometer to adjust the input offset voltage to near zero.

5. Slew Rate Considerations:

   • Be aware of the slew rate limitation (0.3V/渭s) when designing circuits that involve fast-changing signals.

6. Common Mode Rejection Ratio (CMRR):

   • Take advantage of the high CMRR (90dB) by ensuring balanced input impedances to maximize rejection of common-mode noise.

7. Power Supply Rejection Ratio (PSRR):

   • Utilize the high PSRR (90dB) to maintain signal integrity even with slight variations in the power supply voltage.

8. Short-Circuit Protection:

   • The device has built-in short-circuit protection, allowing it to withstand short-circuits for up to 300ms at room temperature. However, avoid prolonged exposure to such conditions to prevent potential damage.

9. Thermal Management:

   • Ensure adequate heat dissipation if operating at higher temperatures or under heavy loads, especially in TO-99 packages.

10. Handling and Storage:

    • Handle with care to avoid static discharge which can damage the sensitive internal components.
    • Store in recommended environmental conditions to preserve performance characteristics.

(For reference only)