Details

---

BUY FS20KM-5 https://www.utsource.net/itm/p/12609506.html

Parameter	Description	Value
Part Number	Full part number	FS20KM-5
Type	Schottky Barrier Diode	-
Package	SOD-323 (SC-89)	-
Maximum Reverse Voltage (VR)	Maximum reverse voltage the diode can withstand without breaking down	20 V
Maximum Forward Current (IF)	Maximum forward current the diode can handle continuously at 25掳C ambient temperature	0.5 A
Peak Forward Surge Current (IFSM)	Maximum forward surge current the diode can handle for a short duration (8.3 ms single half sine-wave)	5 A
Forward Voltage Drop (VF)	Voltage drop across the diode when conducting forward current at 25掳C	0.45 V (typical)
Reverse Leakage Current (IR)	Maximum reverse leakage current at maximum rated reverse voltage and 25掳C	10 渭A (max)
Operating Temperature Range (TOP)	Temperature range over which the diode is designed to operate	-65掳C to +150掳C
Storage Temperature Range (TSTG)	Temperature range over which the diode can be stored without damage	-65掳C to +150掳C
Thermal Resistance (R胃JA)	Thermal resistance from junction to ambient	250掳C/W

Instructions for Use:

1. Handling and Storage:

   • Store the diodes in a dry, cool place away from direct sunlight.
   • Handle the diodes with care to avoid mechanical damage.

2. Mounting:

   • Ensure proper heat dissipation if operating near the maximum forward current.
   • Follow recommended soldering profiles to avoid thermal shock.

3. Electrical Connections:

   • Connect the diode with the correct polarity to avoid damage.
   • Use appropriate wire gauge and connectors to handle the expected current.

4. Surge Current:

   • Do not exceed the peak forward surge current rating for extended periods to prevent overheating and potential failure.

5. Temperature Considerations:

   • Operate within the specified temperature range to ensure reliable performance.
   • Monitor ambient temperature and provide adequate cooling if necessary.

6. Testing:

   • Test the diode using a multimeter or diode tester to verify functionality before installation.
   • Check for any visible signs of damage or wear.

7. Compliance:

   • Ensure that the application complies with relevant safety and regulatory standards.

(For reference only)