Details

---

BUY ACPL-M61L https://www.utsource.net/itm/p/12609515.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA	1.1	1.3	1.5	V
Reverse Breakdown Voltage	V_BR	IR = 1 mA	5	-	7	V
Output Collector-Emitter Saturation Voltage	V_CE(sat)	IC = 15 mA, V_CE(sat) ≤ 0.5 V	-	0.2	0.4	V
Output Collector Leakage Current	I_CBO	VR = 5 V	-	10	100	nA
Isolation Voltage	V_IORM	1 minute, 50/60 Hz	-	-	5000	Vrms
Propagation Delay Time	t_pl	V_IN = 5 V, RL = 100 Ω	2	4	6	μs
Rise Time	t_r	V_IN = 5 V, RL = 100 Ω	0.1	0.3	0.5	μs
Fall Time	t_f	V_IN = 5 V, RL = 100 Ω	0.1	0.3	0.5	μs

Instructions for ACPL-M61L

1. Installation and Handling:

   • Handle the device with care to avoid damage.
   • Ensure proper alignment during installation to prevent short circuits.

2. Power Supply:

   • Ensure that the input voltage is within the specified range to avoid damaging the component.
   • Use appropriate decoupling capacitors near the power supply pins to minimize noise.

3. Operating Temperature Range:

   • The device operates reliably within the temperature range of -40°C to +85°C.

4. Input Circuit:

   • Connect a current-limiting resistor in series with the LED input to ensure the forward current does not exceed the maximum rating.

5. Output Circuit:

   • Ensure the collector-emitter voltage (V_CE) does not exceed the rated breakdown voltage.
   • Connect a pull-down resistor between the output and ground to ensure stable operation when the output is off.

6. Electrical Isolation:

   • The device provides electrical isolation up to 5000 Vrms for one minute at 50/60 Hz. Ensure this isolation capability meets your application requirements.

7. Signal Timing:

   • Consider the propagation delay, rise time, and fall time in timing-sensitive applications to ensure reliable performance.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive materials.

9. Mounting:

   • Follow the manufacturer’s guidelines for PCB layout and mounting to ensure optimal thermal performance and mechanical stability.

10. Safety Precautions:

    • Always follow safety guidelines when handling high voltages and currents.
    • Ensure proper grounding and insulation to protect against electrical hazards.

(For reference only)