Details

---

BUY RT8206LGQW https://www.utsource.net/itm/p/12609520.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	2.5	-	5.5	V
Output Voltage	VOUT	Adjustable	0.8	-	3.3	V
Quiescent Current	IQ	VOUT = 1.8V	-	40	-	渭A
Shutdown Current	ISD	VIN = 3.6V	-	0.1	-	渭A
Load Regulation		IOUT = 10mA to 300mA	-	0.1	-	%
Line Regulation		VIN = 2.7V to 5.5V	-	0.1	-	%
Dropout Voltage	VDROPOUT	IOUT = 300mA, VIN = 3.3V	-	300	-	mV
Operating Junction Temp.	TJ	Continuous	-40	-	125	掳C

Instructions for RT8206LGQW

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.5V to 5.5V.
   • The device should not be operated outside this range to avoid damage.

2. Output Voltage (VOUT):

   • The output voltage can be adjusted between 0.8V and 3.3V using external resistors.
   • Refer to the datasheet for specific resistor values to achieve desired output voltages.

3. Quiescent Current (IQ):

   • The quiescent current is typically 40渭A when the output is set to 1.8V.
   • This parameter is important for low-power applications.

4. Shutdown Current (ISD):

   • When the device is in shutdown mode, the current draw from the input supply is as low as 0.1渭A at an input voltage of 3.6V.

5. Load Regulation:

   • The load regulation is specified as 0.1% over a load current range from 10mA to 300mA.
   • This ensures stable output voltage under varying load conditions.

6. Line Regulation:

   • Line regulation is also specified as 0.1% over an input voltage range from 2.7V to 5.5V.
   • This indicates the stability of the output voltage with changes in input voltage.

7. Dropout Voltage (VDROPOUT):

   • At an output current of 300mA and an input voltage of 3.3V, the dropout voltage is typically 300mV.
   • Lower dropout voltage allows for efficient operation closer to the input voltage.

8. Operating Junction Temperature (TJ):

   • The operating junction temperature range is from -40掳C to 125掳C.
   • Ensure that the ambient temperature and thermal design allow for operation within this range to prevent overheating.

(For reference only)