Details

---

BUY BDT64 https://www.utsource.net/itm/p/12609527.html

Parameter	Description	Value
Part Number	Component Identifier	BDT64
Type	Component Type	Bipolar Darlington Transistor
Package	Enclosure Type	TO-220
VCEO	Collector-Emitter Voltage (Max)	80V
VCBO	Collector-Base Voltage (Max)	80V
VEBO	Emitter-Base Voltage (Max)	5V
IC	Continuous Collector Current (Max)	10A
PTOT	Total Power Dissipation (Max)	100W
hFE	DC Current Gain (Min/Typ)	3000/5000
fT	Transition Frequency	1MHz
RthJC	Thermal Resistance, Junction to Case	1.5掳C/W
Storage Temperature Range	Operating Temperature Range	-55掳C to +150掳C
Mounting Type	Installation Method	Through-Hole

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads or the body.
   • Use appropriate anti-static precautions to prevent electrostatic discharge (ESD) damage.

2. Mounting:

   • Ensure proper alignment of the leads during soldering.
   • Use a heat sink if the power dissipation exceeds the safe operating limits without it.
   • Apply thermal compound between the transistor and the heat sink for better thermal conductivity.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering iron with a temperature of 350掳C 卤 50掳C.
   • Solder each lead for no more than 3 seconds.
   • Allow the component to cool naturally after soldering.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure that the operating temperature is within the storage temperature range.
   • Monitor the junction temperature to avoid overheating.

5. Testing:

   • Use a multimeter to check for continuity and resistance values.
   • Test the transistor in a controlled environment to ensure it meets the specified parameters.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging to protect from static and physical damage.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)