Details

---

BUY 2SA2223A https://www.utsource.net/itm/p/12609536.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCE	-	-	45	V
Emitter-Base Voltage	VEB	-	-	5	V
Collector-Base Voltage	VCB	-	-	45	V
Collector Current	IC	-	100	500	mA
Base Current	IB	-	-	20	mA
Power Dissipation	PT	-	-	625	mW
Transition Frequency	fT	-	150	-	MHz
Storage Temperature	TSTG	-55	-	150	掳C
Operating Temperature	TA	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking if operating at or near maximum power dissipation.
   • Avoid mechanical stress on the leads during soldering.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to ground or the load return.
   • Connect the base (B) to the control circuit.

3. Biasing:

   • Use appropriate biasing circuits to ensure stable operation.
   • Avoid exceeding the maximum base current to prevent damage.

4. Thermal Management:

   • Keep the junction temperature within the specified limits to avoid thermal runaway.
   • Use a heatsink if necessary, especially for high-power applications.

5. Storage and Handling:

   • Store in a dry place away from direct sunlight.
   • Handle with care to avoid static discharge, which can damage the transistor.

6. Testing:

   • Test the transistor using a multimeter or a transistor tester to ensure it is functioning correctly before installation.
   • Check for continuity and proper voltage levels at each terminal.

7. Safety:

   • Always follow safety guidelines when working with electrical components.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)