Details

---

BUY Z0103MN0 https://www.utsource.net/itm/p/12609541.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.6	-	5.5	V	Operating supply voltage range
Input Voltage Range	VIN	0	-	VDD	V	Valid input voltage range
Output Voltage Low	VOL	0	-	0.4	V	Output low voltage level
Output Voltage High	VOH	VDD-0.4	-	VDD	V	Output high voltage level
Input Leakage Current	IIH	-	1	10	渭A	Input leakage current
Output Sink Current	IOS	-	8	20	mA	Maximum output sink current
Output Source Current	IOL	-	8	20	mA	Maximum output source current
Propagation Delay	tpd	-	6	12	ns	Propagation delay time

Instructions for Z0103MN0

1. Power Supply Connection: Ensure the supply voltage (VDD) is within the specified range of 1.6V to 5.5V.
2. Input Signal Handling: The valid input signal should be within the range from 0V to VDD. Avoid exceeding these limits to prevent damage.
3. Output Voltage Levels: For proper logic level recognition, ensure the output low voltage (VOL) does not exceed 0.4V and the output high voltage (VOH) is at least VDD-0.4V.
4. Current Considerations: Monitor the input leakage current (IIH) which should typically be around 1渭A but can go up to 10渭A. The device can handle a maximum of 20mA for both sink and source currents, with typical values around 8mA.
5. Timing Requirements: Account for a propagation delay (tpd) that can vary between 6ns to 12ns in your timing calculations.

This table and set of instructions provide essential information for using the Z0103MN0 component effectively.

(For reference only)