Details

---

BUY SN74AS882NT https://www.utsource.net/itm/p/12609543.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range	4.5	-	5.5	V
Output High Voltage (VOH)	Minimum output high voltage at IOH = -0.4mA	-	2.4	-	V
Output Low Voltage (VOL)	Maximum output low voltage at IOL = 16mA	-	-	0.4	V
Input Low Voltage (VIL)	Maximum input low voltage for logic 0	-	-	0.8	V
Input High Voltage (VIH)	Minimum input high voltage for logic 1	2.0	-	-	V
Propagation Delay Time (tPD)	Time delay from input to output change	-	5.0	-	ns
Power Dissipation (PD)	Maximum power dissipation	-	-	330	mW
Operating Temperature Range (TA)	Ambient operating temperature range	-40	-	85	掳C
Storage Temperature Range (TSTG)	Temperature range for storage	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply input signals that meet the input voltage levels (VIL and VIH).
   • Avoid exceeding the maximum input current ratings.

3. Output Signals:

   • Ensure that the load connected to the output pins does not exceed the maximum current ratings (IOH and IOL).
   • Use appropriate pull-up or pull-down resistors if necessary to maintain proper logic levels.

4. Propagation Delay:

   • Account for the propagation delay time (tPD) in your circuit design to ensure proper timing.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation limit (PD).
   • Operate the device within the specified ambient temperature range (TA).

6. Storage:

   • Store the device in a controlled environment within the storage temperature range (TSTG) to prevent damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions when handling and installing the device.

(For reference only)