Details

---

BUY HHC67E-1H-12VDC https://www.utsource.net/itm/p/12609560.html

Parameter	Value	Unit
Part Number	HHC67E-1H-12VDC	-
Type	Hall Effect Sensor	-
Supply Voltage	12	VDC
Operating Current	8	mA
Output Type	NPN Open Collector	-
Maximum Load Current	50	mA
Operating Temperature	-40 to +85	掳C
Storage Temperature	-40 to +125	掳C
Response Time	100	渭s
Magnetic Sensitivity	30 to 90	Gauss
Housing Material	PBT (Polybutylene Terephthalate)	-
Lead Finish	Tin	-
Mounting	Through-Hole	-

Instructions:

1. Supply Voltage: Connect the sensor to a 12V DC power supply. Ensure the voltage is within the specified range to avoid damage.
2. Output Connection: The output is an NPN open collector. Connect the load between the output and the positive supply. A pull-up resistor (typically 1k惟 to 10k惟) should be connected between the output and the positive supply.
3. Magnetic Field Detection: Place the sensor in the vicinity of a magnetic field. The sensor will switch its output based on the magnetic field strength.
4. Operating Temperature: Ensure the sensor operates within the temperature range of -40掳C to +85掳C for reliable performance.
5. Storage Temperature: Store the sensor in an environment with temperatures ranging from -40掳C to +125掳C.
6. Response Time: The sensor will respond to changes in the magnetic field within 100 microseconds.
7. Mounting: Use through-hole mounting for secure installation. Ensure the leads are soldered properly to avoid mechanical stress.
8. Handling: Handle the sensor with care to avoid damaging the delicate components. Avoid exposure to excessive humidity and corrosive environments.
9. Testing: Before final installation, test the sensor in a controlled environment to ensure it meets the required specifications.

(For reference only)