Details

---

BUY TPS73733DCQR https://www.utsource.net/itm/p/12609561.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.9		5.5	V	Operating input voltage range
Output Voltage	VOUT		3.3		V	Fixed output voltage
Dropout Voltage	VDROPOUT		0.3		V	Voltage difference between VIN and VOUT for regulation
Quiescent Current	IQ		10		渭A	Supply current in normal operation
Shutdown Current	ISD		0.1		渭A	Supply current in shutdown mode
Load Regulation			0.2		%	Change in output voltage with load current change
Line Regulation			0.1		%	Change in output voltage with input voltage change
PSRR at 1kHz			60		dB	Power supply rejection ratio
Operating Temperature	Toper	-40		85	掳C	Ambient operating temperature range
Storage Temperature	Tstg	-65		150	掳C	Storage temperature range

Instructions:

1. Power Supply Connection: Connect the input voltage (VIN) to the power supply ensuring it is within the specified input voltage range of 2.9V to 5.5V.
2. Output Configuration: The device provides a fixed output voltage of 3.3V. Ensure your circuit design accommodates this output voltage.
3. Ground Connection: Ensure a solid ground connection to maintain stability and minimize noise.
4. Bypass Capacitors: Place bypass capacitors close to the input and output pins to improve transient response and stability. Recommended values are typically 0.1渭F and 1渭F.
5. Thermal Considerations: Operate within the specified temperature range (-40掳C to 85掳C). For extended storage, ensure temperatures do not exceed -65掳C to 150掳C.
6. Shutdown Mode: To enter shutdown mode, pull the enable pin low. This reduces the supply current to approximately 0.1渭A.
7. Load Regulation: Be aware that the output voltage can vary by up to 0.2% depending on the load current changes.
8. Line Regulation: Changes in the input voltage will cause less than 0.1% variation in the output voltage.
9. Power Supply Rejection Ratio (PSRR): At 1kHz, the device maintains a PSRR of 60dB, effectively rejecting ripple from the input supply.

For detailed specifications and advanced applications, refer to the datasheet provided by the manufacturer.

(For reference only)