Details

---

BUY KS74AHCT163N https://www.utsource.net/itm/p/12609579.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	5.5	V
Output Current (High)	IOH	-	-	25	mA	VCC = 5V
Output Current (Low)	IOL	-	-	50	mA	VCC = 5V
Input Voltage (High)	VIH	2.0	-	5.5	V
Input Voltage (Low)	VIL	0.0	-	0.8	V
Propagation Delay Time	tpd	-	25	50	ns	VCC = 5V, TA = 25掳C
Power Dissipation	PD	-	-	340	mW	TA = 70掳C
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 5.5V to avoid damage to the device.

2. Output Current:

   • The maximum output current for high and low states should not exceed 25mA and 50mA, respectively, when V_CC is 5V.

3. Input Voltage Levels:

   • For proper operation, input voltages should be within the specified ranges:
     • High level (V_IH): 2.0V to 5.5V
     • Low level (V_IL): 0.0V to 0.8V

4. Propagation Delay Time:

   • The typical propagation delay time is 25ns, with a maximum of 50ns at V_CC = 5V and ambient temperature (T_A) = 25掳C.

5. Power Dissipation:

   • The maximum power dissipation is 340mW at an ambient temperature of 70掳C. Ensure adequate heat dissipation if operating near this limit.

6. Operating and Storage Temperature:

   • The device can operate within a temperature range of -40掳C to 85掳C and can be stored between -65掳C and 150掳C.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Ensure all connections are secure and free from shorts or open circuits.

8. Mounting and Soldering:

   • Follow recommended soldering profiles to avoid thermal stress on the device.
   • Use appropriate flux and cleaning agents to ensure reliable connections.

9. Testing:

   • Perform initial testing under controlled conditions to verify correct operation before integrating into a larger system.

10. Compliance:

    • Ensure the device complies with relevant safety and regulatory standards for your application.

(For reference only)