Details

---

BUY STB4NK60Z https://www.utsource.net/itm/p/12609590.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Breakdown Voltage	V(BR)DSS	-	600	-	V	Drain-Source, Gate Open
Forward Transconductance	gFS	20	-	30	S	VGS = 10V, ID = 5A
Input Capacitance	Ciss	-	780	-	pF	VDS = 15V, f = 1 MHz
Output Capacitance	Coss	-	220	-	pF	VDS = 15V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	140	-	pF	VDS = 15V, f = 1 MHz
Total Gate Charge	Qg	-	95	-	nC	VGS = 10V, VDS = 600V
Gate Threshold Voltage	VGS(th)	2.0	-	4.0	V	ID = 1 mA, Tj = 25掳C
Continuous Drain Current	ID	-	4.0	-	A	Tc = 25掳C, VDS = 600V
Pulse Drain Current	IDM	-	12.0	-	A	tP = 10 渭s, Tc = 25掳C
Power Dissipation	PD	-	240	-	W	Tc = 25掳C
Junction Temperature	Tj	-	-	175	掳C	-
Storage Temperature	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary.
   • Follow the recommended PCB layout guidelines to minimize parasitic inductances.

3. Biasing:

   • Apply the gate voltage (VGS) within the specified range to avoid damaging the gate oxide.
   • Ensure the gate is properly biased to achieve the desired operating conditions.

4. Operation:

   • Do not exceed the maximum ratings for VDS, ID, and PD.
   • Monitor the junction temperature (Tj) to ensure it stays within safe limits.
   • Use appropriate snubber circuits to protect against voltage spikes during switching.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Avoid exposing the device to extreme temperatures or humidity.

6. Testing:

   • Use a calibrated test setup to measure the device parameters accurately.
   • Follow the test conditions specified in the parameter table for consistent results.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Ensure proper grounding and isolation to prevent electrical hazards.

(For reference only)