Details

---

BUY STC04IE170HV https://www.utsource.net/itm/p/12609608.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Continuous Primary Current	IP	-	4	5	A	VD = 250V, f = 100kHz
Continuous Secondary Current	IS	-	170	180	A	VD = 250V, f = 100kHz
Forward Voltage Drop	VF	1.6	2.0	2.4	V	IF = 170A, Tj = 25掳C
Reverse Recovery Time	trr	-	90	110	ns	IF = 170A, IR = 0.1A, Tj = 25掳C
Junction Temperature	Tj	-40	-	150	掳C
Storage Temperature	Tstg	-40	-	150	掳C
Power Dissipation	PD	-	-	1500	W	Tc = 25掳C

Instructions:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Handle with care to avoid mechanical stress which can affect performance.

2. Electrical Connections:

   • Connect the primary and secondary leads correctly to avoid reverse polarity which can damage the device.
   • Use appropriate wire gauges to handle the rated currents without excessive voltage drops.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • Use thermal paste between the device and heatsink for better heat dissipation.

4. Operational Parameters:

   • Do not exceed the maximum continuous primary and secondary currents.
   • Ensure the forward voltage drop is within the specified range to avoid overheating.

5. Storage and Environmental Conditions:

   • Store the device in a dry, cool place within the storage temperature range (-40掳C to 150掳C).
   • Avoid exposure to corrosive environments or high humidity.

6. Testing and Verification:

   • Perform initial testing at lower current levels to verify proper operation.
   • Regularly inspect the device for signs of wear or damage.

7. Compliance and Safety:

   • Ensure the device complies with relevant safety standards and regulations.
   • Follow all manufacturer guidelines and datasheet specifications for safe and reliable operation.

(For reference only)