Details

---

BUY LM4041DYM3-1.2-TR https://www.utsource.net/itm/p/12609616.html

Parameter	Symbol	Min	Typ	Max	Unit
Output Voltage	Vout	-	1.2	-	V
Line Regulation		-	0.004	-	%/V
Load Regulation		-	0.01	-	%/mA
Temperature Coefficient		-	35	-	ppm/°C
Dropout Voltage	Vdo	-	1.6	-	V
Supply Current	ISUPPLY	-	80	-	μA
Initial Accuracy		-	0.4	-	%
Operating Temperature		-40	-	125	°C

Instructions for LM4041DYM3-1.2-TR:

1. Power Supply Connection:

   • Connect the positive supply voltage to the "IN" pin.
   • Ensure the input voltage is higher than the dropout voltage plus the output voltage.

2. Ground Connection:

   • Connect the ground (GND) to the common ground of your circuit.

3. Output Configuration:

   • The "OUT" pin provides the regulated output voltage of 1.2V.

4. Capacitor Requirements:

   • Place a 0.1μF capacitor close to the IN pin for supply decoupling.
   • A 1μF capacitor on the OUT pin helps stabilize the output and improves transient response.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high temperatures or under heavy loads.

6. Handling Precautions:

   • Follow ESD (Electrostatic Discharge) handling precautions when working with the device.

7. Storage Conditions:

   • Store in a dry environment, away from direct sunlight and extreme temperatures.

For detailed design considerations and application circuits, refer to the manufacturer’s datasheet.

(For reference only)