Details

---

BUY AT24C01D-SSHM-T https://www.utsource.net/itm/p/12609629.html

Parameter	Description	Value	Unit
Memory Size	Total memory size	1 Kbit
Organization	Memory organization	128 x 8
Supply Voltage (Vcc)	Operating supply voltage range	1.7 to 5.5	V
Operating Temperature	Temperature range for operation	-40 to +85	掳C
Standby Current	Current consumption in standby mode	1	渭A
Active Current	Current consumption during active operations	3	mA
Write Cycle Time	Time required to complete a write cycle	5	ms
Page Write	Maximum number of bytes that can be written in one page write operation	8	Bytes
SCL Input Low Voltage Level	Maximum input low voltage level for SCL pin	0.4 x VCC	V
SDA Input Low Voltage Level	Maximum input low voltage level for SDA pin	0.4 x VCC	V
Package Type	Type of package	TSSOP

Instructions

1. Power Supply Requirements:

   • Ensure the device is powered within the specified operating voltage range of 1.7V to 5.5V.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.

3. Communication Protocol:

   • Use I2C protocol for communication with the device.
   • Ensure SCL and SDA lines are pulled up with appropriate resistors, typically between 1k惟 and 10k惟 depending on bus length and speed.

4. Write Operations:

   • The device supports byte and page write operations.
   • A maximum of 8 bytes can be written in a single page write operation.
   • Wait at least 5ms after each write cycle before initiating another write operation.

5. Standby Mode:

   • To minimize power consumption, put the device into standby mode when not in use. The current consumption in this mode is approximately 1渭A.

6. Input Levels:

   • For proper logic levels, ensure the SCL and SDA pins do not exceed 0.4 times the supply voltage for low levels.

7. Package Handling:

   • Handle the TSSOP package carefully to avoid damage to the leads and body.

(For reference only)