Details

---

BUY S4015L.. https://www.utsource.net/itm/p/12609631.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.0	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	1.5	2.0	A	Continuous output current
Quiescent Current	IQ	-	0.7	1.0	mA	Supply current at no load
Shutdown Current	ISD	-	0.1	0.5	渭A	Current in shutdown mode
Thermal Shutdown	TSD	-	160	-	掳C	Temperature at which device shuts down
Operating Temp.	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temp.	TSTG	-55	-	150	掳C	Storage temperature range

Instructions for S4015L

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VDD pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Configuration:

   • Connect the load between the OUT pin and GND.
   • Ensure the load does not exceed the maximum output current (2.0 A).

3. Thermal Management:

   • Place the S4015L on a heatsink or a PCB with adequate copper area to dissipate heat.
   • Monitor the operating temperature to ensure it stays within the specified range (-40掳C to 85掳C).

4. Shutdown Mode:

   • To put the device into shutdown mode, apply a low signal (0 V) to the SD pin.
   • The device will enter a low-power state with minimal current draw (0.1 渭A to 0.5 渭A).

5. Storage:

   • Store the device in a dry environment within the temperature range of -55掳C to 150掳C.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

7. Testing:

   • Before final assembly, test the device under typical operating conditions to verify functionality.

(For reference only)