Details

---

BUY RTE2-160T 12VDC https://www.utsource.net/itm/p/12609643.html

Parameter	Value	Unit
Type	RTE2-160T
Voltage	12	V DC
Power Rating	160	W
Current Rating	13.33	A
Operating Temperature	-40 to +85	掳C
Terminal Type	Screw terminal
Insulation Resistance	>100	M惟
Dielectric Strength	1500	V AC
Inrush Current	<100	A
Efficiency	>90%
Dimensions (LxWxH)	100 x 70 x 40	mm
Weight	500	g

Instructions for Use:

1. Installation:

   • Ensure the power supply is turned off before installation.
   • Connect the positive terminal of the power supply to the positive terminal of the RTE2-160T.
   • Connect the negative terminal of the power supply to the negative terminal of the RTE2-160T.
   • Secure the connections using the screw terminals provided.

2. Operation:

   • Turn on the power supply and ensure the voltage is set to 12V DC.
   • Monitor the current draw to ensure it does not exceed 13.33A.
   • Check for any unusual heat or noise during operation.

3. Maintenance:

   • Regularly inspect the terminals for signs of wear or corrosion.
   • Clean the device with a dry, soft cloth to remove dust and debris.
   • Do not use water or solvents to clean the device.

4. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Avoid storing in environments with high humidity or extreme temperatures.

5. Safety Precautions:

   • Do not exceed the maximum operating temperature of +85掳C.
   • Do not short-circuit the terminals.
   • Always disconnect the power supply before performing any maintenance or repairs.
   • Use appropriate personal protective equipment (PPE) when handling the device.

(For reference only)