Details

---

BUY 7W04F https://www.utsource.net/itm/p/12609650.html

Parameter	Description	Value
Part Number		7W04F
Type	Relay	SPDT
Coil Voltage	Operating Voltage	24V DC
Coil Current	Operating Current	55mA
Contact Form		SPDT (1C/O)
Contact Rating	Maximum Switching Capacity	10A, 250V AC
Insulation Resistance	Between Contacts and Coil	100M惟 at 500V DC
Dielectric Strength	Between Contacts and Coil	1500V AC for 1 minute
Mechanical Life	Minimum Mechanical Operations	10 million cycles
Electrical Life	Minimum Electrical Operations	100,000 cycles
Operating Temperature	Operating Range	-40掳C to +85掳C
Storage Temperature	Storage Range	-40掳C to +125掳C
Weight	Approximate Weight	20g

Instructions

1. Installation:

   • Ensure the relay is mounted on a suitable PCB or panel.
   • Connect the coil terminals to the appropriate power supply (24V DC).
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

2. Operation:

   • When the coil is energized, the common contact will switch from the normally closed (NC) position to the normally open (NO) position.
   • When the coil is de-energized, the common contact will return to the normally closed (NC) position.

3. Handling:

   • Handle the relay with care to avoid damage to the contacts or other components.
   • Do not subject the relay to excessive mechanical stress or vibration.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay using a soft, dry cloth. Avoid using solvents that may damage the relay.

5. Safety:

   • Ensure all connections are secure and insulated to prevent electrical shock.
   • Do not exceed the maximum switching capacity of the relay contacts.
   • Follow all local electrical codes and regulations.

(For reference only)