Details

---

BUY RTD14012F https://www.utsource.net/itm/p/12609651.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Supply Voltage	VDD	2.7	-	5.5	V	-
Operating Temperature	TOPR	-40	-	85	掳C	-
Storage Temperature	TSTG	-65	-	150	掳C	-
Input Voltage Range	VIN	0	-	VDD	V	-
Output Current (Sink)	IOS	-	20	30	mA	VDD = 5V
Output Current (Source)	IOL	-	20	30	mA	VDD = 5V
Propagation Delay Time	tPD	-	25	50	ns	VDD = 5V, TA = 25掳C
Power-down Current	IDD	-	1.0	2.0	渭A	VDD = 5V, TA = 25掳C
High-Level Input Voltage	VIH	-	0.7VDD	VDD	V	-
Low-Level Input Voltage	VIL	0	-	0.3VDD	V	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Temperature Considerations:

   • The device operates reliably within the temperature range of -40掳C to 85掳C.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

3. Input Voltage:

   • The input voltage (VIN) should be within the range of 0V to VDD.
   • Avoid applying voltages outside this range to prevent damage to the device.

4. Output Current:

   • The maximum output current for both sink and source operations is 30mA at VDD = 5V.
   • Ensure that the load connected to the output does not exceed these limits.

5. Propagation Delay:

   • The typical propagation delay time (tPD) is 25ns, with a maximum of 50ns at VDD = 5V and TA = 25掳C.
   • This delay should be considered in timing-sensitive applications.

6. Power-down Mode:

   • In power-down mode, the device consumes a maximum of 2.0渭A at VDD = 5V and TA = 25掳C.
   • Use this mode to reduce power consumption when the device is not in use.

7. Input Levels:

   • For high-level inputs, ensure the voltage is at least 0.7 times VDD.
   • For low-level inputs, ensure the voltage is no more than 0.3 times VDD.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent degradation over time.

By following these parameters and instructions, you can ensure optimal performance and reliability of the RTD14012F.

(For reference only)