Details

---

BUY 74F175 https://www.utsource.net/itm/p/12609652.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	4.75	-	5.25	V	-
Input Low Voltage	VIL	0.0	-	0.8	V	-
Input High Voltage	VIH	2.0	-	VCC	V	-
Output Low Voltage	VOL	0.0	0.2	0.4	V	-
Output High Voltage	VOH	2.4	2.7	VCC - 0.4	V	-
Propagation Delay Time	tpd	-	6	12	ns	-
Power Dissipation	PD	-	-	100	mW	-
Operating Temperature	TA	-40	-	85	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Input signals should be within the valid logic levels: V_IL ≤ 0.8V for LOW and V_IH ≥ 2.0V for HIGH.
   • Avoid exceeding the supply voltage on any input pin.

3. Output Signals:

   • The output will be LOW (V_OL) when the output is 0.0V to 0.4V.
   • The output will be HIGH (V_OH) when the output is 2.4V to V_CC - 0.4V.
   • Ensure that the load connected to the output does not exceed the maximum current rating of the device.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 6ns but can vary between 6ns and 12ns.
   • Consider this delay when designing timing-sensitive circuits.

5. Temperature Range:

   • Operate the device within the temperature range of -40°C to 85°C for reliable performance.
   • Store the device within the storage temperature range of -65°C to 150°C.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use appropriate ESD protection measures during handling and assembly.

7. Power Dissipation:

   • Ensure that the power dissipation (P_D) does not exceed 100mW to prevent overheating and potential damage to the device.

8. Decoupling Capacitors:

   • Place decoupling capacitors (typically 0.1μF) close to the V_CC and GND pins to filter out noise and ensure stable operation.

9. Testing and Debugging:

   • Use a multimeter or oscilloscope to verify the correct operation of the device.
   • Check for proper power supply, input signals, and output levels.

By following these guidelines, you can ensure the reliable and efficient operation of the 74F175 device.

(For reference only)