Details

---

BUY ATF16V8B-15PC. https://www.utsource.net/itm/p/12609656.html

Parameter	Description	Value
Package Type	Type of package	PLCC-20
Number of Pins	Number of pins	20
Operating Voltage (Vcc)	Supply voltage range	4.5 V to 5.5 V
Maximum Power Dissipation (Pd)	Max power dissipation at 25掳C	330 mW
Operating Temperature Range (Tamb)	Ambient temperature range	-40掳C to +85掳C
Storage Temperature Range (Tstg)	Storage temperature range	-65掳C to +150掳C
Propagation Delay Time (tpd)	Propagation delay time at Vcc = 5V, Ta = 25掳C	15 ns
Power-on Reset (POR)	Power-on reset function	Yes
Configuration Memory	Configuration memory type	Non-volatile
Input Current (Ii)	Input current per pin	卤10 渭A
Output Current (Io)	Output current per pin	卤25 mA
Input Capacitance (Ci)	Input capacitance per pin	10 pF
Output Capacitance (Co)	Output capacitance per pin	15 pF
Fan-out (Fo)	Fan-out capability	10
Programmable Terms	Number of programmable terms	16
Macrocell Structure	Macrocell structure	8 x 16

Instructions for ATF16V8B-15PC

1. Power Supply:

   • Ensure that the supply voltage (Vcc) is within the specified range of 4.5 V to 5.5 V.
   • Connect Vcc to the appropriate pin and ground (GND) to the ground pin.

2. Programming:

   • Use a compatible programmer to program the device.
   • Follow the programming guidelines provided by the manufacturer to avoid damage to the device.

3. Configuration:

   • The device can be configured using the non-volatile configuration memory.
   • Ensure that the device is properly configured before use to avoid unexpected behavior.

4. Handling:

   • Handle the device with care to avoid static discharge.
   • Store the device in a dry and cool environment to prevent damage from moisture.

5. Operating Environment:

   • Operate the device within the specified temperature range (-40掳C to +85掳C).
   • Avoid exposing the device to extreme temperatures or humidity.

6. Signal Levels:

   • Ensure that input signals are within the valid logic levels for the device.
   • Do not exceed the maximum input current (卤10 渭A) and output current (卤25 mA).

7. Testing:

   • Test the device after programming and configuration to ensure proper functionality.
   • Use a logic analyzer or oscilloscope to verify signal integrity and timing.

8. Reset Function:

   • The device includes a power-on reset (POR) function. Ensure that the power supply is stable during startup to avoid unintended resets.

9. Fan-out:

   • The device can drive up to 10 standard TTL loads. Adjust the fan-out as needed based on the load requirements.

10. Storage:

    • Store the device in the recommended storage temperature range (-65掳C to +150掳C) to maintain its reliability.

By following these instructions, you can ensure the optimal performance and longevity of the ATF16V8B-15PC device.

(For reference only)