Details

---

BUY H649A https://www.utsource.net/itm/p/12609696.html

Below is the parameter table and instructions for the H649A, a high-speed phototransistor optocoupler.

H649A Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Current	IF	-	50	100	mA
Forward Voltage	VF	1.2	1.5	1.8	V	IF = 20 mA
Peak Reverse Voltage	VRRM	-	-	7	V
Collector-Emitter Voltage	VCE	-	-	30	V
Collector Current	IC	-	50	100	mA
CTR (Current Transfer Ratio)	CTR	20	400	600	%	IF = 5 mA, IC = 5 mA
Rise Time	tr	-	1.5	5	渭s	RL = 1 k惟, CL = 100 pF
Fall Time	tf	-	1.5	5	渭s	RL = 1 k惟, CL = 100 pF
Storage Temperature	Tstg	-40	-	125	掳C
Operating Temperature	Topr	-40	-	110	掳C

H649A Instructions

1. Handling Precautions:

   • ESD Protection: The H649A is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures such as wrist straps and grounded work surfaces.
   • Temperature: Ensure that the device operates within the specified temperature range to avoid damage or reduced performance.

2. Mounting:

   • Soldering Temperature: Use a soldering iron with a temperature of 300掳C to 350掳C. Do not exceed 350掳C for more than 10 seconds.
   • Lead Bending: Bend the leads carefully to avoid excessive force. Ensure that the leads are bent at least 1 mm from the body to prevent stress on the device.

3. Operating Conditions:

   • Forward Current (IF): Ensure that the forward current does not exceed 100 mA to prevent overheating and potential damage.
   • Collector-Emitter Voltage (VCE): Do not exceed 30 V to avoid breakdown of the collector-emitter junction.
   • Collector Current (IC): Keep the collector current within the range of 0 to 100 mA to ensure reliable operation.

4. Performance Optimization:

   • CTR (Current Transfer Ratio): The CTR can vary widely (20% to 600%). For optimal performance, use the typical value of 400% when designing circuits.
   • Rise and Fall Times: The rise and fall times are influenced by the load resistance (RL) and capacitance (CL). Use appropriate values to achieve the desired switching speed.

5. Storage:

   • Humidity: Store the device in a dry environment to prevent moisture-related issues.
   • Temperature: Store the device within the storage temperature range (-40掳C to 125掳C).

6. Testing:

   • Initial Testing: Before integrating the H649A into your circuit, perform initial testing to verify its functionality. Check the forward voltage (VF) and current transfer ratio (CTR) under standard conditions.

By following these parameters and instructions, you can ensure the reliable and efficient operation of the H649A optocoupler in your applications.

(For reference only)