Details

---

BUY YH119-012-1Z11-1A https://www.utsource.net/itm/p/12609707.html

Parameter	Description
Part Number	YH119-012-1Z11-1A
Type	Hall Effect Sensor
Operating Voltage	4.5V to 24V DC
Output Type	NPN Open Collector
Maximum Output Current	20mA (Continuous)
Magnetic Sensitivity	Bop: 30G to 90G (Typical: 60G)
Release Sensitivity	Brp: -30G to -90G (Typical: -60G)
Hysteresis	10G to 30G (Typical: 20G)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +150掳C
Response Time	< 1渭s
Quiescent Current	< 10渭A (Typical: 5渭A)
Package	SOT-23 (Surface Mount)
Polarity	Bipolar (Operates with both North and South poles)
Mounting Orientation	Any

Instructions for Use

1. Power Supply:

   • Connect the VCC pin to the positive terminal of the power supply.
   • Connect the GND pin to the negative terminal of the power supply.

2. Output Connection:

   • Connect the OUT pin to the input of your control circuit or microcontroller.
   • A pull-up resistor is required between the VCC and OUT pins to ensure proper operation of the open collector output.

3. Magnetic Field Application:

   • Place the sensor near the magnetic field source.
   • The sensor will switch its output state when the magnetic field strength reaches the operating point (Bop) and release point (Brp).

4. Temperature Considerations:

   • Ensure that the sensor operates within the specified temperature range to avoid damage or inaccurate readings.

5. Handling Precautions:

   • Handle the sensor with care to avoid static discharge, which can damage the sensitive components.
   • Avoid exposing the sensor to excessive mechanical stress or vibration.

6. Testing:

   • Before integrating the sensor into your application, test it in a controlled environment to verify its performance and reliability.

7. Storage:

   • Store the sensor in a dry, cool place away from direct sunlight and sources of heat.

By following these instructions, you can ensure optimal performance and longevity of the YH119-012-1Z11-1A Hall Effect Sensor.

(For reference only)