Details

---

BUY X24C04 https://www.utsource.net/itm/p/12609713.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Operating Voltage	Vcc	Continuous	2.5	5.0	5.5	V
Standby Current	Icc	Vcc = 5V, Ta = 25掳C	-	1	5	渭A
Active Current	Icc	Vcc = 5V, Ta = 25掳C	-	1	3	mA
Write Time	tW	Vcc = 5V, Ta = 25掳C	4	-	10	ms
Read Cycle Time	tRC	Vcc = 5V, Ta = 25掳C	0	-	5	渭s
Page Write Cycle Time	tPW	Vcc = 5V, Ta = 25掳C	4	-	10	ms
Data Retention	-		10	-	-	Years
Operating Temperature	Ta		-40	-	85	掳C
Storage Temperature	Tstg		-65	-	150	掳C
Number of Write/Erase Cycles	-		1	-	100	k

Instructions for Using X24C04

1. Power Supply:

   • Ensure the operating voltage (Vcc) is within the range of 2.5V to 5.5V.
   • The typical operating voltage is 5V.

2. Current Consumption:

   • In standby mode, the current consumption should be less than 5渭A.
   • In active mode, the current consumption should be less than 3mA.

3. Write Operations:

   • The write time (tW) is between 4ms and 10ms.
   • The page write cycle time (tPW) is also between 4ms and 10ms.
   • Ensure that no read or write operations are initiated during these times to avoid data corruption.

4. Read Operations:

   • The read cycle time (tRC) is up to 5渭s.
   • Ensure that the read operation is completed before initiating another read or write operation.

5. Data Retention:

   • The device retains data for at least 10 years under normal operating conditions.

6. Temperature Range:

   • The operating temperature (Ta) range is from -40掳C to 85掳C.
   • The storage temperature (Tstg) range is from -65掳C to 150掳C.

7. Write/Erase Cycles:

   • The device can withstand up to 100,000 write/erase cycles.

8. Handling and Storage:

   • Store the device in a dry, cool place to ensure long-term reliability.
   • Handle the device with care to avoid static damage.

9. Programming:

   • Follow the specific programming sequences provided in the datasheet to ensure correct data writing and reading.
   • Use appropriate pull-up resistors on the SDA and SCL lines if using I2C communication.

10. Testing:

    • Test the device in a controlled environment to verify its functionality before deploying it in a final application.

By adhering to these parameters and instructions, you can ensure optimal performance and longevity of the X24C04 EEPROM.

(For reference only)