Details
BUY RTC4543SAA https://www.utsource.net/itm/p/12609715.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | - | 2.0 | - | 5.5 | V |
| Operating Temperature | Toper | - | -40 | - | 85 | 掳C |
| Storage Temperature | Tstg | - | -65 | - | 150 | 掳C |
| Clock Frequency | fCLK | - | 32.768 | - | 32.768 | kHz |
| Output Current (IOL) | IOL | VDD = 5V, VOUT = 0.4V | 10 | - | 20 | mA |
| Output Current (IOH) | IOH | VDD = 5V, VOUT = 4.6V | -10 | - | -20 | mA |
| Input Leakage Current | IIK | VDD = 5V | -1 | - | 1 | 渭A |
| Quiescent Current | IQ | VDD = 5V, No Load | 0.5 | - | 2 | 渭A |
| Time Update Rate | tUPD | - | - | 1 | - | s |
| Time Accuracy | tACC | 25掳C, 32.768kHz crystal | -20 | 0 | +20 | ppm |
Instructions for RTC4543SAA
Power Supply:
- Ensure the supply voltage (VDD) is within the range of 2.0V to 5.5V.
- The device operates over a wide temperature range from -40掳C to 85掳C.
Clock Source:
- Use a 32.768kHz crystal oscillator for accurate timekeeping.
- Ensure the crystal is properly connected to the designated pins.
Output and Input Currents:
- The output current (IOL) should not exceed 20mA when VDD = 5V and VOUT = 0.4V.
- The output current (IOH) should not exceed -20mA when VDD = 5V and VOUT = 4.6V.
- The input leakage current (IIK) should be within 卤1渭A at VDD = 5V.
Quiescent Current:
- The quiescent current (IQ) is typically around 0.5渭A but can go up to 2渭A under no load conditions.
Time Update and Accuracy:
- The time is updated every second.
- The time accuracy is 卤20ppm at 25掳C with a 32.768kHz crystal.
Storage and Handling:
- Store the device in a temperature range of -65掳C to 150掳C.
- Handle with care to avoid damage from static electricity and physical stress.
Programming:
- Use the appropriate control registers to set and read the time and date.
- Refer to the datasheet for detailed register maps and programming instructions.
Application Notes:
- For optimal performance, ensure the PCB layout minimizes noise and interference.
- Use decoupling capacitors close to the power supply pins to stabilize the supply voltage.
For more detailed information, refer to the official datasheet of the RTC4543SAA.
(For reference only)View more about RTC4543SAA on main site
