Details

---

BUY G5562A https://www.utsource.net/itm/p/12609729.html

Parameter	Description	Value	Unit
Type	PhotoMOS Relay	-	-
Number of Channels	-	1	-
Input Voltage (VLED)	LED Forward Voltage	1.2	V
Input Current (ILED)	LED Forward Current	10	mA
Output Load Voltage (VOUT)	Maximum Load Voltage	60	VDC
Output Load Current (IOUT)	Maximum Load Current	0.5	A
Insulation Resistance	Between Input and Output	1000	M惟
Contact Form	-	SPST-NO (Single Pole Single Throw, Normally Open)	-
Operating Temperature	-	-40 to +85	掳C
Storage Temperature	-	-55 to +125	掳C
Humidity	-	0 to 95% (Non-condensing)	% RH
Dimensions	-	6.2 x 3.5 x 5.2	mm

Instructions for Use:

1. Input Connection:

   • Connect the LED terminals to the control circuit.
   • Ensure the forward current through the LED does not exceed 10 mA to avoid damage.

2. Output Connection:

   • Connect the load between the output terminals.
   • Ensure the load voltage does not exceed 60 VDC and the load current does not exceed 0.5 A.

3. Insulation:

   • Maintain a minimum insulation resistance of 1000 M惟 between the input and output circuits to ensure proper isolation.

4. Environmental Conditions:

   • Operate the relay within the temperature range of -40掳C to +85掳C.
   • Store the relay within the temperature range of -55掳C to +125掳C.
   • Keep the humidity level between 0% and 95% (non-condensing).

5. Handling:

   • Handle with care to avoid mechanical stress.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage.

6. Mounting:

   • Solder the relay to the PCB following the recommended soldering profile.
   • Ensure proper cooling if used in high-temperature environments.

7. Testing:

   • Test the relay under typical operating conditions to verify performance.
   • Use a multimeter to check continuity and insulation resistance.

8. Compliance:

   • Ensure compliance with relevant safety and regulatory standards for your application.

(For reference only)