Details

---

BUY CS8326C https://www.utsource.net/itm/p/12609731.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage	2.5	-	5.5	V
Quiescent Current (IQ)	Current consumption in active mode	-	100	-	渭A
Output Current (IOUT)	Maximum output current per channel	-	50	100	mA
Shutdown Current (ISD)	Current consumption in shutdown mode	-	1	-	渭A
Operating Temperature (TOPR)	Operating temperature range	-40	-	85	掳C
Storage Temperature (TSTG)	Storage temperature range	-65	-	150	掳C
Input Voltage Range (VIN)	Range of input voltages for control signals	0	-	VCC	V
Output Voltage Range (VOUT)	Range of output voltages	0	-	VCC	V
Rise Time (tR)	Time for output to rise from 10% to 90% of final value	-	200	-	ns
Fall Time (tF)	Time for output to fall from 90% to 10% of initial value	-	200	-	ns
Propagation Delay (tPD)	Time delay between input and output transitions	-	150	-	ns

Instructions for Using CS8326C

1. Power Supply:

   • Connect the VCC pin to a stable power supply within the range of 2.5V to 5.5V.
   • Ensure the ground (GND) pin is connected to the system ground.

2. Quiescent Current:

   • The device consumes approximately 100 渭A in active mode. Ensure your power supply can handle this current.

3. Output Configuration:

   • The CS8326C can drive up to 100 mA per channel. Connect the load to the appropriate output pins (OUT1, OUT2, etc.).

4. Shutdown Mode:

   • To enter shutdown mode, set the SHUTDOWN pin to a high logic level. The device will consume less than 1 渭A in this mode.
   • To resume operation, set the SHUTDOWN pin to a low logic level.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for optimal performance.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

6. Input Signals:

   • Apply control signals to the input pins (IN1, IN2, etc.) within the range of 0V to VCC.
   • Ensure that the input signals are clean and stable to avoid unintended behavior.

7. Output Signals:

   • The output signals will follow the input signals with a propagation delay of approximately 150 ns.
   • The rise and fall times of the output signals are typically around 200 ns.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

9. Testing and Troubleshooting:

   • Before connecting the device to a live circuit, verify all connections and power supply levels.
   • Use a multimeter to check for proper voltage levels at the VCC and GND pins.
   • If the device does not function as expected, check for any short circuits or incorrect connections.

By following these instructions, you can ensure reliable and efficient operation of the CS8326C.

(For reference only)