Details

---

BUY CD4023BCM https://www.utsource.net/itm/p/12609736.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	3.0		18	V
Input Low Voltage	VI(L)	ICC = 5mA, VDD = 5V		0.8		V
Input High Voltage	VI(H)	ICC = 5mA, VDD = 5V		3.2		V
Output Low Voltage	VO(L)	IO = 4mA		0.4		V
Output High Voltage	VO(H)	IO = -4mA		4.6		V
Propagation Delay Time	tpd	VDD = 5V, TA = 25掳C		9		ns
Power Dissipation	PD				100	mW

Instructions for CD4023BCM:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the operating range of 3.0V to 18V.

2. Input Signals:

   • For a valid low input signal, the voltage should be less than or equal to 0.8V at VDD = 5V.
   • For a valid high input signal, the voltage should be greater than or equal to 3.2V at VDD = 5V.

3. Output Signals:

   • When driving a load, ensure that the output current does not exceed the specified limits to avoid damage.
   • The output low voltage (VO(L)) should be no more than 0.4V when sourcing up to 4mA.
   • The output high voltage (VO(H)) should be at least 4.6V when sinking up to 4mA.

4. Propagation Delay:

   • Expect a typical propagation delay time of 9 nanoseconds under standard conditions (VDD = 5V, TA = 25掳C).

5. Thermal Considerations:

   • Keep power dissipation below 100mW to prevent overheating and potential damage to the device.

6. Handling:

   • This component is sensitive to electrostatic discharge (ESD); use appropriate handling practices to prevent damage.

7. Storage:

   • Store in a dry, cool place away from direct sunlight to maintain performance and longevity.

(For reference only)