Details

---

BUY CSD87350Q5D https://www.utsource.net/itm/p/12609738.html

Parameter	Symbol	Test Conditions	Min	Typical	Max	Unit
Continuous Drain Current	ID	VGS = 10V, Tc = 25掳C	-	30	-	A
Pulse Drain Current	ID(Pulse)	VGS = 10V, Tc = 25掳C, t = 10ms, Duty Cycle = 1%	-	60	-	A
Drain-Source Breakdown Voltage	BVdss	ID = 250渭A, IS = 0	-	30	-	V
Gate-Source Voltage	VGS(th)	ID = 250渭A, VDS = 10V	1.5	2.5	4.5	V
On-State Resistance	RDS(on)	VGS = 10V, ID = 30A, Tc = 25掳C	-	5.5	-	m惟
Total Gate Charge	Qg	VGS = 10V, VDS = 10V, ID = 30A	-	95	-	nC
Input Capacitance	Ciss	VDS = 10V, f = 1MHz	-	2100	-	pF
Output Capacitance	Coss	VDS = 10V, f = 1MHz	-	320	-	pF
Reverse Transfer Capacitance	Crss	VDS = 10V, f = 1MHz	-	380	-	pF
Junction-to-Case Thermal Resistance	R胃JC	-	-	0.45	-	掳C/W
Maximum Junction Temperature	TJ(max)	-	-	150	-	掳C

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Handle with care to avoid static damage.

2. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within safe limits.
   • Use recommended soldering profiles to avoid thermal stress.

3. Electrical Connections:

   • Connect the gate to the control circuit with minimal inductance.
   • Ensure the drain and source connections are robust to handle high currents.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and temperature.
   • Operate within the specified gate-source voltage range to prevent device damage.

5. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • Use thermal paste or thermal interface materials for better heat dissipation.

6. Testing:

   • Use appropriate test conditions as specified in the parameter table for accurate measurements.
   • Ensure the test equipment is calibrated and capable of measuring the parameters accurately.

7. Safety:

   • Follow all safety guidelines when handling high-voltage and high-current circuits.
   • Use protective gear and follow standard electrical safety practices.

(For reference only)