Details

---

BUY FGL40N120 https://www.utsource.net/itm/p/12609747.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Collector-Emitter Voltage	V CES	-	-	1200	V	Maximum voltage between collector and emitter
Collector Current	I C	-	-	40	A	Maximum continuous collector current
Power Dissipation	P TOT	-	-	350	W	Total power dissipation
Junction Temperature	T J	-20	-	175	掳C	Operating junction temperature range
Storage Temperature	T STG	-55	-	150	掳C	Storage temperature range
Gate Charge	Q G	-	180	-	nC	Total gate charge
Turn-on Delay Time	t d(on)	-	90	-	ns	Turn-on delay time
Rise Time	t r	-	60	-	ns	Rise time
Turn-off Delay Time	t d(off)	-	80	-	ns	Turn-off delay time
Fall Time	t f	-	60	-	ns	Fall time

Instructions for FGL40N120:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings listed in the parameter table.
   • Use appropriate heat sinks to manage power dissipation and maintain safe operating temperatures.

2. Installation:

   • Ensure proper mounting to a heatsink to dissipate heat effectively, especially under high load conditions.
   • Tighten the mounting screws to the recommended torque specified by the manufacturer to ensure good thermal contact.

3. Gate Drive Requirements:

   • Provide sufficient gate drive voltage and current to ensure reliable turn-on and turn-off times as specified.
   • Keep gate connections short to minimize inductance which can affect switching performance.

4. Operating Environment:

   • Operate within the specified temperature ranges to avoid damage or reduced performance.
   • Protect against moisture and corrosive environments that could degrade the component.

5. Testing:

   • Perform initial testing at lower currents and voltages to verify correct operation before full-load testing.
   • Regularly monitor device performance and temperature during operation to ensure reliability.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)