Details

---

BUY LTC6752IS5#TRMPBF https://www.utsource.net/itm/p/12609758.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating Range	2.7		5.5	V
Input Common-Mode Voltage	VCM		-0.3		6.0	V
Output Voltage (High)	VOH	IO = -1mA		2.4	VCC	V
Output Voltage (Low)	VOL	IO = 16mA			0.4	V
Propagation Delay	tPD	VCM = 0V to VCC		9		ns
Power Dissipation	PD	All Inputs High			25	mW
Operating Temperature	Toper		-40		125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 2.7V to 5.5V.

2. Input Signal Handling:

   • The input common-mode voltage (VCM) should be maintained between -0.3V and 6.0V relative to ground.

3. Output Considerations:

   • When designing circuits, consider that the output high voltage (VOH) can reach up to the supply voltage VCC, and the output low voltage (VOL) can go as low as 0.4V when sourcing 16mA.

4. Timing Characteristics:

   • Be aware of the propagation delay (tPD), which is typically 9ns under standard conditions.

5. Thermal Management:

   • The device is rated for operation from -40掳C to 125掳C. Ensure adequate heat dissipation if operating near the upper temperature limit.

6. Power Dissipation:

   • Keep in mind the maximum power dissipation (PD) is 25mW with all inputs high, which may affect the design of the PCB layout and thermal management considerations.

For detailed application-specific information and further parameters, refer to the official datasheet provided by the manufacturer.

(For reference only)