Details

---

BUY LL014 https://www.utsource.net/itm/p/12609767.html

Parameter	Description	Value
Part Number	Device Identifier	LL014
Type	Component Type	Inductor
Frequency Range	Operating Frequency	1 MHz to 50 MHz
Inductance	Nominal Inductance	10 渭H
Tolerance	Inductance Tolerance	卤10%
DC Resistance	Maximum DC Resistance (DCR)	0.05 惟
Current Rating	Maximum Continuous Current	2 A
Temperature Range	Operating Temperature Range	-40掳C to +85掳C
Packaging	Component Packaging	Through-Hole
Case Size	Physical Dimensions	6.3 mm x 6.3 mm
Height	Component Height	3.2 mm
Material	Core Material	Ferrite
Shielding	Magnetic Shielding	Unshielded

Instructions for Use:

1. Handling:

   • Handle the LL014 with care to avoid mechanical damage.
   • Avoid exposing the component to excessive heat, moisture, or corrosive environments.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Use appropriate soldering techniques to avoid overheating the component.
   • Allow sufficient space around the inductor for proper cooling.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering iron with a temperature setting between 300掳C and 350掳C.
   • Apply solder to the leads and pads, ensuring a good mechanical and electrical connection.
   • Do not apply excessive pressure during soldering to prevent damage to the component.

4. Testing:

   • After installation, verify the inductance value using an LCR meter to ensure it falls within the specified tolerance range.
   • Check for any short circuits or open circuits on the PCB.

5. Storage:

   • Store the LL014 in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use to protect them from static discharge and physical damage.

6. Disposal:

   • Dispose of the LL014 according to local environmental regulations.
   • Recycle electronic components whenever possible.

(For reference only)