Details

---

BUY MIP2G4MD https://www.utsource.net/itm/p/12609780.html

Parameter	Description	Value
Device Type	Microcontroller Module	MIP2G4MD
Microcontroller	Integrated MCU	PIC18F45K22
Operating Voltage	Supply Voltage Range	2.0V to 5.5V
Clock Speed	Maximum Clock Frequency	64 MHz
Flash Memory	Program Memory Size	32 KB
RAM	Data Memory Size	2 KB
EEPROM	On-chip EEPROM Size	256 bytes
ADC Channels	Analog-to-Digital Converter Channels	13 channels, 10-bit resolution
PWM Channels	Pulse Width Modulation Channels	3 channels
UART Interfaces	Universal Asynchronous Receiver-Transmitter	2
SPI Interfaces	Serial Peripheral Interface	1
I2C Interfaces	Inter-Integrated Circuit	1
CAN Interfaces	Controller Area Network	1
Temperature Range	Operating Temperature Range	-40掳C to +85掳C
Package Type	Module Package Form	DIL (Dual In-line)
Dimensions	Module Dimensions	76mm x 51mm

Instructions for Use:

1. Power Supply: Connect the module to a power supply within the operating voltage range (2.0V to 5.5V). Ensure stable power supply to avoid unexpected behavior.
2. Programming: Use a suitable programmer compatible with the PIC18F45K22 microcontroller to upload your firmware. Follow the programming guidelines provided by the manufacturer.
3. Interface Configuration: Configure UART, SPI, I2C, and CAN interfaces as per your application requirements using the internal registers or development environment settings.
4. Peripheral Setup: Initialize ADC, PWM, and other peripherals in your code according to the data sheet specifications.
5. Development Environment: Utilize MPLAB X IDE and XC8 compiler for writing and compiling code for this module.
6. Testing: After setup, thoroughly test all functionalities including communication interfaces and peripheral operations to ensure correct operation.
7. Mounting: Mount the module on a suitable PCB or breadboard ensuring proper connections and spacing as per the dimensions provided.

For detailed specifications and advanced configurations, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)