Details

---

BUY 74HC4050A https://www.utsource.net/itm/p/12609781.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 5V	-	1.5	-	V
Input High Voltage	VIH	VCC = 5V	-	3.5	-	V
Output Low Voltage	VOL	IOL = 4mA	-	0.1	-	V
Output High Voltage	VOH	IOH = -4mA	-	4.9	-	V
Input Leakage Current	IIL	VIN = 0V	-	1	-	渭A
Output Leakage Current	IOL	VOUT = 0V	-	1	-	渭A
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	-	18	-	ns
Power Consumption	Ptot	-	-	-	100	mW

Instructions for Using 74HC4050A

1. Power Supply:

   • Connect the V_CC pin to the positive supply voltage (2.0V to 6.0V).
   • Connect the GND pin to the ground.

2. Input Signals:

   • Apply input signals to the IN pins. Ensure that the input voltages are within the specified range for V_IL and V_IH.

3. Output Signals:

   • The output signals will be available on the OUT pins. Ensure that the load connected to the output does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes. It is typically 18 ns at V_CC = 5V and T_A = 25掳C.

5. Power Consumption:

   • The total power consumption should not exceed 100 mW to avoid overheating and potential damage to the device.

6. Handling Precautions:

   • Handle the 74HC4050A with care to avoid static discharge, which can damage the device.
   • Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.

7. Storage and Operating Temperature:

   • Store the device in a dry, cool place.
   • The operating temperature range is typically from -40掳C to +85掳C.

8. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and layout of the 74HC4050A. Ensure that all pins are correctly connected as per the application requirements.

By following these instructions, you can ensure reliable and efficient operation of the 74HC4050A hex non-inverting buffer/line driver.

(For reference only)