Details

---

BUY 9R800C https://www.utsource.net/itm/p/12609798.html

Parameter	Value	Unit
Part Number	9R800C	-
Resistance	9.8	惟
Tolerance	卤5%	%
Power Rating	1/4	W
Operating Temperature	-55 to +125	掳C
Case Size	0805	-
Terminal Type	SMD	-
Compliance	RoHS Compliant	-

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) ensuring correct orientation.
   • Use a soldering iron or reflow oven to attach the resistor to the PCB.
   • Ensure the solder joints are smooth and free of voids.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Apply a small amount of flux to the pads.
   • Solder the resistor at a temperature between 230掳C and 260掳C for no more than 3 seconds per pad.
   • Allow the solder to cool naturally without disturbance.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of bridges or shorts.
   • Use a multimeter to verify the resistance value if necessary.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to prevent static damage.

(For reference only)